Regulations concerning the Performance of Work

  1. Part 1: Introductory provisions

    Chapter 1. Introductory provisions

  2. Part 2: Requirements for work involving chemical and biological risk factors

    Chapter 2. Substance index

    Chapter 3. Work where chemicals may be a risk to the health and safety of employees

    Chapter 4. Work with asbestos

    Chapter 5. Hot work

    Chapter 6. Work in surroundings that may entail exposure to biological agents

    Chapter 7. Work where there is a risk of reproductive harm

    Chapter 8. Work at wastewater treatment plants

    Chapter 9. Work with cytostatics

  3. Part 3: Requirements for work under exposure to physical risk factors

    Chapter 10. Requirements for the use of work equipment

    Chapter 11. Facilitating the use of work equipment

    Chapter 12. Inspection and maintenance of work equipment and plant

    Chapter 13. Work equipment subject to a requirement for inspection by a competent enterprise

    Chapter 14. Work that can entail exposure to noise or mechanical vibrations

    Chapter 15. Ionising radiation

    Chapter 16. Artificial optical radiation

    Chapter 16 A. Electromagnetic field

    Chapter 17. Work at height

    Chapter 18. Work with lifting equipment

    Chapter 19. Work with mobile work equipment

    Chapter 20. High-pressure jetting

    Chapter 21. Excavation work

    Chapter 22. Safety signage, signalling and communication

  4. Part 4: Requirements relating to other work that involves risk

    Chapter 23. Risk assessments, training and information in connection with manual work

    Chapter 23A Work that may entail a risk of exposure to violence and threats of violence.

    Chapter 24. Work on operations control and safety monitoring

    Chapter 25. Requirements for inspection, marking and filling of compressed air cylinders for diving and respiratory protection equipment

    Compressed air cylinders that are not approved for continued use shall be stamped with an X over the inspector's stamp, filling pressure, test pressure and filling gas.

    Chapter 26. Health and safety during work under water or under increased ambient pressure

    Chapter 27. Rock work

    Chapter 28. Work in connection with carbon dioxide extinguishing systems

    Before starting any repair and inspection work in rooms protected by a carbon dioxide extinguishing system,
    1. a.
      the release mechanism for these rooms shall be effectively secured so that panic release of the system is not possible;
    2. b.
      the system shall be locked by closing and locking the main valves and, if applicable, the distribution valves;
    3. c.
      if the main valves of a system cannot be locked in the closed position, the system shall be secured by installing a spectacle flange on high-pressure pipes before or immediately after the main valve and setting it to the closed position.

    Chapter 29. Work in or on tanks, pipelines, rooms etc. where flammable products or hazardous substances could be present

    Chapter 30. Risk of avalanches in occupancy areas and work areas

  5. Part 5: Register of exposed employees

    Chapter 31. Register of exposed employees

  6. Part 6: Final provisions

    Chapter 32. Final provisions